![]() |
Vintage Bates Solo Seat Harley Triumph Bobber Chopper |
offer US $49.99
Vintage Bates solo seat, I pulled this off an old ridgid triumph I bought 25 years ago, this seat is probably early '70's vintage. This is what we used to run in the late '60's early '70's before the goofy stepped seats came along. This seat has plenty of patina to look just right, but is still in sound usable condition. The cover has one small area on the right side rubbed through-see pics, other than that it's in great shape. The threads on the front mounting bolt are bad, easy fix. The springs are 7", these work well for a ridgid Triumph, shorter springs usually work better for Harleys.
![]() |
VINTAGE TRIUMPH TRIDENT T150 COMPLETE ENGINE |
offer US $325.00
EVERYTHING APPEARS TO BE IN GOOD CONDITION NO BROKEN FINS ANYWHERE ALL THREE CARBS ARE ON AND COMPLETE WITH FUEL LINES SIDE CASES ARE IN VERY GOOD SHAPE ALSO THE ONLY THING MISSING IS THE AIR CLEANER THIS MOTOR HAS SAT IN STORAGE FOR 26 YEARS THE TRANSMISSION SEEMS TO CLICK THROUGH ALL GEARS BY HAND BUT I BELEIVE THE RINGS MAY BE SIEZED THE MOTOR WILL NOT TURN OVER
![]() |
chopper harley triumph springer vintage rim tire bobber |
offer US $50.00
nice rim airhart vintage good condition light spoke oxidation on rim but as you can see still very presentible condition. all brake components are there comes with a vintage tire as well
![]() |
Triumph Terrier frame Vintage Flat Dirt Track Tracker |
offer US $10.00
This is a frame for a Triumph Terrier. It has the plunger suspension in the rear. These are the frames like Gary Nixon used early in his career on his 250 short trackers. The plunger was removed and an aluminum plate was fastened on for the quick change rear wheel. This frame was an old racer. It still has the aluminum rear fender that is in ok shape. Use it for your restoration or build it up into the ultimate Classic 250 brakeless racer.
![]() |
Triumph Brake Pedal Vintage Brake Arm |
offer US $15.00
Vintage Triumph brake pedal. Unknown fitment, although I know it does not fit a 1970 650. Includes pivot bolt.
| Triumph BSA SHOWA Vintage Motorcycle Shocks -NEW |
offer US $64.99
3 position adjustment to accommodate your riding style. Eye to eye mount, 12-1/2 inches from center eye to center eye. Total length is 13-1/2 inches.
-
![]() |
Vintage Triumph Norton BSA Veglia Tachometer MORE |
offer US $20.00
Used very little Veglia Tachometer that was used on the late 1978 and 1979 on the Triumph but could be used for the Norton BSA. This is a great Rare spare item that reads well without bounce on a test drill unlike many that bounce a great deal of the time. I believe that this is a 4:1 ratio that was common with many manufacturers especially the British. This includes the mounting rubber that was used on the 1975 T160 and the 1979 Bonneville.
![]() |
Vintage BSA Triumph Chopper 16" Rear Wheel & Tire! |
offer US $19.99
Vintage BSA Triumph Chopper 16" Rear Wheel & Tire. This is in very good condition including chrome. This came off a BSA chopper but Im sure it will fit a Triumph as well. This is a MT90-16T Carlisle tire that is in like new condition. This comes with the hub for the brakes which is in good condition. This comes with the sprocket for the chain, smiths speedometer drive and axle.
![]() |
Vintage Triumph 750cc lower end crankcase bottom end |
offer US $99.99
Vintage Triumph T-140 crankcases - bottom end 750cc. Crank, rods cams, gears and cases all look good. Cases don't look like they have ever been split. I think that this could be cleaned up and put back into service as is (but that is just my personal opinion).
![]() |
Triumph Tappered Megaphone Mufflers Superior Vintage |
offer US $89.99
VINTAGE SUPERIOR MUFFLERS THESE WERE MADE IN THE 70'S BY SUPERIOR. THEY WILL FIT ANY TRIUMP NORTON BSA OR ANY SCOOT WITH 1 1/2 EXHAUST PIPE. THESE WERE STORED FOR MANY YEARS BUT ARE FLAWLESS. THESE ARE CALLED REVERSE CONE MEGAPHONE MUFFLERS .These are 18 1/2 inches long and come with straps and clamps.These are wide open and have no baffles which makes a very unique sound...You are bidding on a pair. The straps are not chrome but regular steel!
![]() |
VINTAGE TRIUMPH TANK & SEAT ~ U GOTTA SEE ! |
offer US $99.00
I was just told this was made in the late 60's in California by the Butts Company, and looks to have the orignal metalic gel-coat on it. Here's one you don't see every day. It has BUTTS stamped in the bottom of the tank. It has double petcocks at the rear. I'm selling both together. This is a fiberglass kit. It was pulled off a Triumph race bike in the late 60's. Super rare item.
-











