 |
Maico 490 front fender |
offer US $5.00
Front fender that will fit the 1982 maico 490 and may fit other models and years as well, this is brand new, never got the chance to install it.
 |
Maico 490 Enduro / MC / USA All Models Fork Seals |
offer US $11.75
Pair of Brand New Fork Oil Seals for the following Maico Forks : Model/ Year(s): Maico 490 Enduro / MC / USA All models Fully Guaranteed 'OEM' Quality Natural Rubber seals (Not cheap silicone).
 |
Maico Barnett Clutch Plate Set 83 85 250 490 Nos |
offer US $39.99
( One Set "6" ) New Maico Clutch Plates ( Fiber ) Part # ??? Fits: "83 / 85" 250 / 490cc
 |
Maico 3ed Over R- Ring 400cc Nos Vintage Motocross |
offer US $9.99
One ) New Maico Ring Part # 2104 ( 3rd over 77.45mm ) Fits: 400cc NOTE: This Is NOT An L-Ring
 |
Maico Clutch Arm 78 82 Nos Vintage Motocross |
offer US $9.99
One ) New Maico Clutch Arm Part # 2898 Fits: "78 / 82"
-
 |
Whirlpull Throttle w/ Cable AHRMA Maico Husky Penton CZ |
offer US $35.00
A new whirlpull-style throttle AND a universal throttle cable. These will fit Maico, Husky, CZ, Penton, Bultaco and other vintage dirt bikes. The cable is adjustable and while we can't guarantee it will fit every possible combination of bike and carb (there are just too many possible setups), it should fit most of them. We know it fits Mikuni, Keihin and Bing because we've tried it. Still, there's always some combo that doesn't work. The cable is 50-1/2 inches long (44-inch sheath) and includes a cable adjuster midway on the cable. These universal cables are largely identical to the Motion Pro Universal Cables which we have used on many bike restorations, but this cable is made by Emgo. The throttle is a good quality metal and nylon sidepull unit with adjuster and cable hood.
 |
36mm Mikuni & Jet Kit AHRMA Husky Can-Am Maico Penton |
offer US $149.00
NEW 36mm Mikuni VM carb and our 25-piece Mikuni Main Jet and Tuning Kit. What you're getting: NEW 36mm VM Mikuni round slide carb (AHRMA legal) Jet holder with jet wrench 21 Main Jets from #200 through #400 (in 10-step increments) Mikuni Tuning Guide Compartment plastic box to hold the jets in order Everything is new and this is a great deal. If you've been putting off switching your vintage bike to a reliable new Mikuni carb, here's your chance.
 |
Magura Levers& Throttle Maico Husky AHRMA Motocross CZ |
offer US $69.00
new and genuine set of Magura levers and a Whirlpull-style throttle to fit Maico, Husky, Penton, Montesa, Ossa, Bultaco, CZ and most other vintage dirt bikes including the Japanese brands. You're getting REAL Magura forged aluminum levers and perchs, not the cheapie "like-Magura" pot-metal imitations sold by others. You're bidding on a set of levers and perches (clutch and front brake are different) Also included is a Whirlpull-style (not made by Magura) sidepull throttle. This throttle is popular because it allows a lot of cable adjustment, and our customers have been requesting an alternative to the Magura throttle, which works better with some cables than others. The Magura lever sets are split-perch designs for easy installation without removing your grips. Cable adjusters are included and everything is new, never used.
 |
Maico 250/400/490 Brake Shoes AHRMA Vintage Motocross |
offer US $55.00
A pair of new EBC brake shoes to fit almost every Maico made from the early 70s through 1983. We have a limited number of these on hand again after a long wait from the distributor. Brake shoes fit the conical front hub and all the rear hubs. Give your Maico some WHOA power again. Gooved EBC design keeps mud and muck from affecting the brakes. These are new, in the box.
 |
Maico Parts - Front Wheel |
offer US $29.99
Late 70s-80s Maico MC 250cc #3262038 21" Front Wheel. No tire. No tube. (Akron T) spokes a little rusty.
-
